FIBARO - WALL PLUG FGWPE-102 ZW5, FR
The Fibaro Wall Plug is an intelligent and extremely compact plug module, which allows you to control lighting or any other device.
This page has been visited ... times
Fibaro has always been a manufacturer of Z-wave modules of very high quality, they know how to combine aesthetics and functionality, just look at the switches they provide, simply Magnificent.
Below are 3 pictures of Z-wave 700 FGWPE/F-102 Fibaro smart socket. Besides, for that I would like to thank Domadoo who allowed me to carry out this test. At first glance this shot does not present anything exceptional so what could justify this price. 🤔
The socket is available in Eu France and Eu German version known as Schuco, I advise you to take the Schuco version if available because backward compatibility is greater, you will encounter fewer problems with your additional accessories.
This is how Fibaro stands out from its competitors thanks to color, but does it justify the price difference? After integration, when you unplug the plug and plug it back in, if it briefly lights up green, it is recognized in the network, if it is red, resume your inclusion. (The inclusion is done simply by connecting the mains plug).
Hold down for the time that the socket flashes purple, then a colored indication appears.
if the consumption is:
Everything is functional, however a shell at the Firmware level is recognized as Unknown, I did not look into the question especially since in Jeedom it is well recognized.
Thanks to ZwaveJS, the Fibaro fgpw-102 smart plug brings up information from:
More a whole battery of Parameters and Diagnostics in short than Happiness.
For everyone’s happiness, Jeedom also uses the excellent ZwaveJS, it also brings up all the consumption info, however a little more to Jeedom Luna it does bring up the Firmware info.
We also have access to the different parameters of the module, the Z-wave is still great, especially at the level of the mesh
PS: under Jeedom I encountered latency when refreshing information, unlike Homeassistant where the status feedback is more reactive.
|230V AC, 50/60 Hz
|Rated load current
|up to 1.6W
|Power output (for resistive load)
|In accordance with EU standards
|RED 2014/53/EURoHS 2011/65/EU
|0 – 40°C
|To be used with E or F type (Schuko) sockets
|CEE 7/16 – max load 2.5 A, CEE 7/17 – max load 11A
|Z-Wave, Z-Wave+ (firmware 3.2 or higher)
|868.4 or 869.8 MHz EU, 869.0 MHz RU
|Radio transmit power
|up to -10 dBm (EIRP)
|up to 50 m outdoors, up to 30 m indoors, up to 40 m indoors (firmware 3.2 or higher)
|(D x H) 43 x 65mm
If at home you only use the Z-wave network then you are used to spending a fortune for a single module, then if this is your case the Fibaro FGPWE/P-102 is for you without a doubt. For the others, there is Neo-Coolcam, which makes a similar module for half the price, but the manufacturing quality and the quantity of parameters are not at all the same.